Hinged presentation
Magnetic closure
A hinged lid with concealed magnets creates a controlled reveal for gifting, launch kits and premium product sets.
Custom manufacturing · Delhi NCR
Rigid Box Manufacturer in Delhi NCR
Magnetic, top-and-bottom, shoulder-neck, drawer, book-style and collapsible rigid boxes developed around your product dimensions, board, print, finish and insert requirement.
What makes a box rigid?
A wrapped board structure made for presentation and protection
A rigid box uses dense paperboard to create a firm shell, then wraps that structure in printed, coloured or textured paper. Unlike a folding carton, the completed box normally holds its shape without being erected by the end customer.
The result is a packaging format suited to products that benefit from a deliberate opening experience, a fitted insert or a keepsake-quality presentation. Construction, board thickness, wrap, insert and decoration must be specified as one system—not selected in isolation.
Six starting structures
Choose the opening experience first
The right construction depends on product fit, storage, assembly and the way the customer should reveal the product.
Two-piece classic
Top and bottom
A separate lift-off lid and base give a clean silhouette for beauty, apparel, confectionery and keepsake packaging.
Three-piece reveal
Shoulder-neck
An inner neck projects between the lid and base, adding alignment, strength and a contrasting reveal line.
Sleeve and tray
Drawer box
A rigid sleeve holds a pull-out tray for jewellery, accessories, confectionery and compact electronics.
Hinged cover
Book-style
A cover opens like a book around a rigid tray, creating a broad branding area for editions, kits and documents.
Fold-flat construction
Collapsible rigid box
Panels fold down for storage and transit, then assemble into a premium box using concealed magnetic or adhesive closures.
| Construction | How it works | Typical applications | Important cost drivers | Dispatch state |
|---|---|---|---|---|
| Magnetic closure | Hinged flap closes with concealed magnets | Gift sets, PR kits, premium electronics | Magnet count, cover span, insert and decoration | Usually assembled |
| Top and bottom | Separate lid lifts away from the base | Beauty, apparel, confectionery, accessories | Lid depth, wrap area, insert and fit tolerance | Usually assembled |
| Shoulder-neck | Inner neck aligns a three-piece lid and base | Fragrance, jewellery, collector products | Extra neck component, alignment and lining | Assembled |
| Drawer | Tray slides from a rigid outer sleeve | Jewellery, chocolate, stationery, devices | Pull tab, sleeve tolerance and tray insert | Usually assembled |
| Book-style | Hinged cover opens around a product tray | Presentation kits, editions, premium documents | Hinge, magnet or ribbon, cover area and insert | Assembled |
| Collapsible | Scored panels fold flat and lock into shape | E-commerce gifting and space-sensitive programs | Closure system, reinforcement and assembly method | Flat or semi-flat |
Specification checklist
Define the whole box before production
Good quoting begins with enough information to compare like with like. A decorative finish cannot be priced or sampled accurately until the box size, structure, wrap and quantity are understood.
Send your requirement- Internal dimensions
- Length × width × height measured around the product and fitment.
- Construction
- Magnetic, drawer, lid-and-base, shoulder-neck or collapsible format.
- Board and wrap
- Rigid board specification paired with printed, coloured or textured wrapping paper.
- Decoration
- Print, foil, emboss, deboss, spot effects or another approved finish.
- Insert
- Paperboard, foam, EVA or fabric-covered fitment shaped around the product.
- Quantity and delivery
- Estimated units, delivery city and required schedule for feasibility review.
Board, wrap and insert
Specify the structural stack—not only the surface colour
Board thickness is selected against box size, product weight, opening action and required stiffness. The ranges below are useful planning references, not universal prescriptions; the approved sample determines the final specification.
Compact and lighter formats
Can suit smaller boxes and lighter products when the dimensions and construction provide enough support.
Many premium programs
A common planning range for balanced stiffness, wrapping and presentation across standard rigid-box formats.
Larger or heavier packs
May be considered for larger spans, heavier contents or a more substantial hand feel, subject to engineering review.
Printed, coloured or textured paper
Choose coated paper, uncoated colour stock, specialty texture or another approved wrap based on print, finish and rub resistance.
A deliberate inside surface
A coloured or printed lining can continue the identity inside the lid, tray or neck and cover visible structural board.
Fit, protection and reveal
Paperboard, foam, EVA or fabric-covered fitments are developed around the product shape and presentation requirement.
Specification note: millimetre ranges are indicative planning guidance. Final board, wrap, adhesive, insert and tolerance are confirmed only after the structure and physical sample are approved.
Print and decoration
Build the visual hierarchy with the right process
Artwork, paper, coverage and finishing method must be tested together because not every effect behaves the same on every wrap.
CMYK offset
For photography, gradients and multi-colour graphics on a suitable printed wrap.
Pantone spot colour
For a specified brand colour when the selected paper and print process support it.
Foil stamping
Metallic, pigment or holographic foil applied with a die for logos and controlled accents.
Embossing and debossing
A raised or recessed impression that gives a mark physical depth, with or without foil.
Spot or raised UV
Selective gloss or dimensional contrast used on compatible printed and laminated surfaces.
Screen printing
Useful for selected opaque, metallic or high-impact applications subject to the wrap material.
Lamination
Gloss, matte, soft-touch or approved specialty film can alter appearance and surface durability.
Specialty paper and inside print
Texture, colour, pattern and interior graphics can extend the identity beyond the outer lid.
Feasibility note: fine type, large solid areas, tight registration, foil-plus-emboss combinations and raised effects are reviewed against the artwork and chosen substrate before approval.
Transparent quote logic
How a custom rigid-box rate is derived
No honest manufacturer can price every rigid box from a single size chart. Unit cost is built from the approved structure, material consumption, process steps and production quantity.
Board, wrap and yield+Print and finish+Conversion and hand assembly+Insert, packing and freight
Sampling, dies, screens, foil blocks or other tooling may be quoted as one-time development costs rather than hidden inside every production unit.
Eight inputs that move the rate
- 01Finished dimensionsDrive board and wrap yield.
- 02ConstructionChanges components, tolerances and assembly.
- 03Board, wrap and liningMaterial grade and coverage affect consumption.
- 04Print coverageColours, solids and inside printing add process steps.
- 05Finishing passesFoil, emboss, UV and lamination require separate operations.
- 06Insert systemMaterial, cavities and covering change conversion.
- 07QuantitySetup and tooling are distributed across the run.
- 08Packing and deliveryCarton plan, dispatch state and destination matter.
MOQ and quantity planning
Compare production tiers instead of chasing one universal MOQ
MOQ depends on size, construction, substrate, finish, insert and machinery setup. These ranges explain the commercial pattern; the final minimum is confirmed only after the actual brief is reviewed.
Development samples
Structural or finished samples for approval. This is development work, not the production MOQ.
Case-by-case
Possible for selected specifications, usually with a higher unit rate because setup is spread across fewer boxes.
Common planning point
Many custom rigid-box programs become commercially practical around 500+ production units.
Complex or efficient runs
Some specialty materials, finishing combinations or production plans may require 1,000 units or more.
Buying tip: request comparable rates at 500, 1,000, 3,000 and 5,000 units. That makes setup cost, scale benefit and inventory commitment visible before you decide.
Built around the product
Rigid packaging for distinct handling and presentation needs
The category influences insert design, surface durability, opening experience and the amount of product information that must appear on the pack.
Colour print · premium cartonsBeauty & personal careSkincare, haircare, cosmetics and routine kitsExplore beauty packaging Gold foil · precision insertJewellery & precious productsCompact formats with secure product retentionExplore jewellery boxes 
Custom EVA · accessory zoningElectronics & devicesDevice fitments, cable wells and launch kitsExplore electronics packaging Dual-door reveal · custom printCorporate giftingHampers, commemorative packs and branded kitsExplore gift packaging 
Paper tube · full-colour wrapFood & confectioneryCookies, chocolate, tea and premium dry-food packsExplore food packaging 
Vivid print · reusable formatWellness & pharmaSupplements, personal wellness and presentation packsExplore wellness packaging Foil · satin insert · drawer pullFragrance & bottlesPerfume, attar and discovery-set presentationExplore fragrance boxes 
Brand colour · e-commerce unboxingFashion & lifestyleFootwear, apparel, accessories and creator kitsExplore fashion packaging Metallic linework · premium boardPremium retail & launchesCollector editions, invitations and campaign kitsExplore custom boxes Real work, real finishes
Packaging made for actual products
Project photographs from Printing Material show the practical range: rigid drawers, magnetic formats, paper tubes, printed cartons, custom inserts, metallic foil and specialty opening systems.
View 12 more real packaging projects
From the factory
Watch current projects take shape
Real reels from Printing Material show finished packs, inserts and production activity. Open any project on Instagram for the full video.
Approval points
Quality begins before the production run
A sample is used to review the real structure and product fit. Visible details can then be aligned to the approved specification before production planning.
- 01
Structural review
Finished size, opening action, board fit and insert retention.
- 02
Visual review
Wrap, colour intent, registration, logo position and finish placement.
- 03
Production reference
The approved specification becomes the common reference for manufacturing checks.
Rigid box FAQ
Plan the right questions before you request a quote
What types of boxes come under rigid packaging?
Common constructions include magnetic closure, top-and-bottom or lid-and-base, shoulder-neck, drawer, book-style and collapsible rigid boxes. Each creates a different opening action, material yield, assembly requirement and delivery volume.
Which board thickness should I choose?
Approximate planning ranges run from 1.5–1.8 mm for compact lighter formats, 2.0–2.5 mm for many premium programs and 2.5–3.0 mm for some larger or heavier packs. Final board is selected against dimensions, load and construction, then confirmed in the sample.
Which printing and finishing options are available?
Depending on the wrap and artwork, options can include CMYK offset, Pantone spot colour, foil stamping, embossing, debossing, spot or raised UV, screen printing, lamination, specialty paper and inside printing. Feasibility is approved process by process.
What is the MOQ for custom rigid boxes?
There is no honest universal MOQ. Below 500 units is reviewed case by case, many programs become commercially practical around 500 units, and complex specifications may require 1,000 or more. Development samples are not the production MOQ.
How is the rigid-box price calculated?
Price is derived from finished dimensions, construction, board and wrap yield, print coverage, finishing passes, insert, conversion and hand assembly, order quantity, tooling, packing and delivery. Comparing 500, 1,000, 3,000 and 5,000-unit tiers makes the scale effect visible.
Which industries do you manufacture rigid boxes for?
Briefs can be developed for beauty, jewellery, electronics, corporate gifting, confectionery, wellness, fragrance, fashion and premium retail launches. Product weight, fitment, secondary-packaging needs and required pack information still determine the final structure.
A practical guide for your order
Rigid Box Manufacturer Delhi NCR | Custom Printed Boxes
Printing Material manufactures custom rigid and related paper boxes in Delhi NCR. Start with the product, choose an opening style, then confirm the board, printing and inside holder before placing a production order.
Compare a complete specification
Two boxes that look alike can use different board, wrapping paper, inserts and finishing processes. Ask for each part to be identified in the quote. Include the quantity per size and artwork version, sample scope, delivery postcode and required date. This makes a magnetic, drawer or lift-off lid comparison useful rather than a comparison of incomplete prices.
Explore each opening style in detail
The guides below explain which parts to measure and inspect for magnetic, sliding, top-bottom, shoulder-neck and fold-flat boxes. They include real portfolio references and practical sample checks. For a bottle, jewellery item or gift kit, start with the actual contents rather than copying the outside dimensions of another brand's box.
Order planning for Delhi NCR
For Delhi, Noida, Gurugram, Ghaziabad and Faridabad requirements, share the delivery postcode, receiving hours and whether you need assembled or flat packaging. Confirm transport and arrival timing in the written quote. Our Delhi NCR service coverage does not represent a separate branch in every city.
Manufactured in Okhla, supplied across India
We serve Delhi, Gurugram (Gurgaon), Noida, Faridabad and Ghaziabad, with dispatch across India. Share your postcode, packed quantity and required arrival date so production and freight can be planned separately. See production timelines and VRL or rail dispatch planning.
Printing Material operates three factories in Okhla Industrial Area, Delhi, with a team of 50+ people. In-house capabilities include die cutting, embossing, leafing, offset and digital printing, box making and a box designer. A dedicated salesperson coordinates your specification, sample and production brief.
Explore the next detail
Start with a useful brief
